1、FURUNO電子海圖完整題庫1. What does the alert number 820 indicate?AIS lostTT lostNavtex messje receivedCross track alarm2.What does the alert number 450 indicate?2.Route: Illegal To WPTRADAR comm. ErrorLAN adapter version errorHeadi|Bnsor not available3.What does the alert number 495indicate?3.What does the

2、alert number 495indicate?.Anchor watch errorTrack control stoppedSteering parameter errorFilter: Init.4.What does the alert number 380indicate?4.What does the alert number 380indicate?Route: errorUser chart: foundAIS COM errorUser chart: error5.What does the alert number 635indicate?5.What does the

3、alert number 635indicate?Log errorDual axis log (WT) errorDual axis log (BT) error6.What does the alert number 640indicate?6.What does the alert number 640indicate?A. Datum mismatchgn: Over 30 min.RADAR antenna ID errorGyro error (Trackpilot)7.What does the alert number 031indicate?7.What does the a

4、lert number 031indicate?A. Sensor adapter 1 COM timeoutSensor adapter 2COMmeouSensor adapter 2COMmeou8.9.8.9.Sensor adapter 3 COM timeoutSensor adapter 4 COM timeoutWhat does the alert number 257 indicate?Heading sensor not availablePrg track: Need higher speedPrg track: Use radius CtrlGyro 3 COM er

5、rorWhat does the alert number 470 indicate?A.WGS 84 not usedB.Different geodetic datumC.Sentence syntax error1/18FURUNO電子海圖完整題庫DatumWhere do you control the settings and visibility of the chart layers?In Chart LegendIn Symbol DisplayIn Chart DisplayIn Basic SettingWhere do you set the Safety Depth?I

6、n Chart LegendIn Symbol DisplayIn Chart AlertIn Chart DisplayWhere do you set the Shallow Contour?In Chart LegendIn Symbol DisplayIn Chart AlertIn Chart DisplayWhere do you set the Deep Contour?In Chart LegendIn Symbol DisplayIn Chart AlertIn Chart DisplayWhere do you set the Safety Contour?In Chart

7、 LegendIn Symbol DisplayIn Chart AlertIn Chart DisplayWhere do you set the Shallow Pattern?In Chart DisplayIn Symbol DisplayIn Basic SettingIn Chart CatalogueWhere do you control the AIO?In Chart LegendIn Symbol DisplayIn Chart DisplayIn Chart CatalogueWhere do you select the color Palette used to d

8、isplay the charts?In Chart LegendIn Chart DisplayIn Quick Access BarIn Chart CatalogueWhere do you switch between Multicolor and Two Color settings for the charts?In Chart LegendIn Symbol Display2/18FURUNO電子海圖完整題庫.In BasicD. In Chart DisplayWhen an ENC is outlined in Green in the Chart Catalogue - i

9、t means?License is valid - chart is up-to-date.License is valid - chart is NOT up-to-date.License is available - chart not installed.License is not available or has expired.When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.License is valid

10、- chart isLicense is valid - chart isNOup-to-date,C. License is available - chart not installed.D. Cancelled chart.When an ENC is outlined in Magenta in the Chart Catalogue - it means?License is valid - chart is up-to-date.License is valid - chart is NOT up-to-dateLicense is available - chart not in

11、stalledLicense is valid - up-to-date status doubtful.When an ENC is outlined in Yellow in the Chart Catalogue - it means?License is valid - chart is NOT up-to-date.License is available - chart not installed.License is valid - up-to-date status doubtful.License is not available or has expired.When an

12、 ENC is outlined in Red in the Chart Catalogue - it means?License is valid - chart is NOT up-to-date.License is available - chart not installed.C. License is valid - up-to-date status doubtful.License is not available or hasWhen an ENC is outlined in Blue in the Chart Catalogue - it means?A. License

13、 is valid - chart is up-to-date.License is valid - chart is NOT up-to-date.License is available - chart not installed.Where can you find information concerning the charts stored on the HDD?On the Internet.The Chief Officer will know.In the chart catalogue.In the Chart Display menu.26.How can you tel

14、l if your FURUNO ECDIS is displaying an ENC?A. There is an “ENC Data available indication in the Own Ship Functions Box.There is an RNC data indication in the Own Ship Functions Box.The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.There is no special indication in the Own Ship

15、Functions Box. Where do you find information on Magnetic Variation in the ENCs on thURUNO ECDIS?A. In Chart Display3/18FURUNO電子海圖完整題庫B In Chart CatalogueC In Chart Alert.Which information can you find in the Vector Chart Legend?B Base CD numberC Permit expiration dateD Safety Contour setting. Which

16、information can you find in the Vector Chart Legend? A T&P NoticesC WarningsD Safety Contour setting. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition & Update dateD Safety Contour setting.Which information can you fi

17、nd in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&P Notice.Which information can you find in the Raster Chart Legend? A Horizontal datumB Safety DepthC User Permit numberD License number. Which information can you find in the Raster Chart Legend?A Shallow

18、 ContourB Chart NameC Chart Viewing dateD Deep Contour. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date.How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.

19、B I select RNC in the Chart Legend.D I select RNC in the Chart Catalogue.How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?4/18FURUNO電子海圖完整題庫A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status

20、 Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the obje

21、ct.D I right click on the object.38 How do you record Own Ship,s position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship,s position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event LoglC I press the CTRL & ACQ/A

22、CT button on the Control Unit.D I select RecordEvent Log and User Event from the Instant Access bar and insert the observation in the Record User Event window.b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship,s positions in the Voyage log automatically.B I can record

23、 a position fix manually by using just one distance and one bearing.C I can playback my past voJH track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually

24、on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my setting of Ship,s maximum draft.C I can set Ship,s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as

25、a Safety Message.41 Which operation can you perform on the FURUNO ECDIS?A Icanplay back my ship,s past track on the ECDIS.B Icanrecord my position manually on the RNCs.C Icancreate Notes from my Voyage Log to document avoyageonthecharts.D Icanset the ECDIS to include engine log informationintotheVoy

26、agelogautomatically.b142 How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.5

27、/18FURUNO電子海圖完整題庫43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB mem

28、ory device.D I can create a User Chart from the Voyage Log and save it to a USB memory device.44 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyle lOHC

29、I can create a backup copy of Own Ship,s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45 Which operation can you perform during a voyage or after completion of a voyage?A

30、I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an external storage.46 Which operation can yo

31、u perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding further detail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memory device.C I can create a backup copy of the Voyage log on a USB me

32、mory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?47Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogD RADAR Log49 Which recording function is

33、 available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ships LogD Details Lo50 How do you manually record Own Ship,s current position in the Logs? A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button

34、on the Control Unit.6/18FURUNO電子海圖完整題庫D By using the record position event function of the Event Logl51 What is a Manual Update?A A Manual update is an update applied using the Manual function in Load & UpdateCharts.B A ManualupdaB A Manualupdadate is an update to the charts created by the operator

35、from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representative of the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.52How do you delete a specif

36、ic object added using the Manual Update function?52A I select Clear in the Manual Update window.B I use the Delete function in the tool.5354555657ndowick on the object and use the Manual Update windto delete it.D I set the View Until date for the Manual Update two months back in time.How do you modi

37、fy an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C 5354555657ndowick on the object and use the Manual Update windto delete it.D I set the View Until date for the Manual Update two months back in time.How

38、do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.How can you see if a chart object is crea

39、ted using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.Which color scheme is used for a Manual update on the Furuno ECDIS

40、?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbolsWhere can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDISWhere can you find a list of the Manual Updates that have been applied to the FurunoECDIS?A In t

41、he Chart LegendndowIn the Manual Update WindC In the Chart CatalogueD In the Chart Display menu58 How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the

42、Chart Display dialogue.7/18FURUNO電子海圖完整題庫D I deselect the option from the Symbol Display dialogue.59 Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display

43、dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create t

44、he object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61 Can you create a Manual Update from a Navtex Message shown on the ECDIS? A Yes - by manually creatilgBe object.B Yes - by letting the ECDIS create the object automatically.C Yes - eithe

45、r by creating it manually or letting the ECDIS create it automatically.D No 62 Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63 Where can you update the ENCs?BIntheUpdatefunctionoftheChart DisplayCIntheUpdatefunct

46、ionoftheSystem SettingsDIntheUpdatefunctionoftheChart Legend64 Wherecanyou update the RNCs onthe Furuno ECDIS?AIntheUpdatefunctionoftheMenuB In the Chart Manager (Individual Update)CIntheUpdatefunctionoftheChart CatalogueDIntheUpdatefunctionoftheChart Legend65 How do you update your vector charts on

47、 the Furuno ECDIS using the ENC Update CD? A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using theChart Details function in the Chart Catalogue. 66 How are regular T&Ps updated on the ECDIS?A T&Ps must alway

48、s be created as Manual Updates.B I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.C Most T&Ps are included in the weekly update CD and these are updated automaticallyD I cannot update T&Ps on the FURUNO ECDIS.67 How do you update

49、your raster charts on the Furuno ECDIS using the RNC Update CD?8/18FURUNO電子海圖完整題庫I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using theChart Details function in the Chart Ca

50、talogue. 68 How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit the ENC.PMT and then I use the S52 Presentation Librar

51、y from the System menu in the Chart Menu to convert the ENCs into SENCs.69 What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:

52、Update CD70 How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71 Where can you enter informative notes on Pilot data (VHF channels etc.)

53、to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart 72 How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information should be displayed.B I select

54、 Note as an option for the Tidal Label or Clearing Line where the information should be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User C

55、hart being used for monitoring?73I move the monitored routetomode and edit the Linked UserI move the monitored routetomode and edit the Linked UserB I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for the desired user

56、 chart.D I left click on User Chart in the Status Bar and then I select Plan.74 Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.9/18FURUNO電子海圖完整題庫C Yes by usi. the Export/Import tool in the Settings function of the Status Bar.D Yes

57、but only to an ECDIS with the exact same software version number.75 Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76 Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77 W

58、hich printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78 Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle

59、 ReportB Full reportC System reportD Detailed report80 Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81 Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsBBBBHHIC Only on vector c

60、hartsD Only on raster charts82 How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDIS screen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on Route and then on Route Info in