單片機矩陣鍵盤行列掃描程序單片機矩陣鍵盤行列掃描程序單片機矩陣鍵盤行列掃描程序xxx公司單片機矩陣鍵盤行列掃描程序文件編號：文件日期：修訂次數：第1.0次更改批準審核制定方案設計，管理制度//行列掃描程序，可以自己定義端口和掃描方式，這里做簡單介紹#include<>//包含頭文件#defineucharunsignedchar#defineuintunsignedintunsignedcharconstdofly[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f, 0x77,0x7c,0x39,0x5e,0x79,0x71};//0-Fucharkeyscan(void);voiddelay(uinti);voidmain(){ucharkey;P2=0x00;//1數碼管亮按相應的按鍵，會顯示按鍵上的字符while(1){key=keyscan();//調用鍵盤掃描，switch(key){case0x7e:P0=dofly[0];break;//0按下相應的鍵顯示相對應的碼值case0x7d:P0=dofly[1];break;//1case0x7b:P0=dofly[2];break;//2case0x77:P0=dofly[3];break;//3case0xbe:P0=dofly[4];break;//4case0xbd:P0=dofly[5];break;//5case0xbb:P0=dofly[6];break;//6case0xb7:P0=dofly[7];break;//7case0xde:P0=dofly[8];break;//8case0xdd:P0=dofly[9];break;//9case0xdb:P0=dofly[10];break;//acase0xd7:P0=dofly[11];break;//bcase0xee:P0=dofly[12];break;//ccase0xed:P0=dofly[13];break;//dcase0xeb:P0=dofly[14];break;//ecase0xe7:P0=dofly[15];break;//f}}}ucharkeyscan(void)//鍵盤掃描函數，使用行列反轉掃描法{ucharcord_h,cord_l;//行列值P3=0x0f;//行線輸出全為0cord_h=P3&0x0f;//讀入列線值if(cord_h!=0x0f)//先檢測有無按鍵按下{delay(100);//去抖if(cord_h!=0x0f){cord_h=P3&0x0f;//讀入列線值P3=cord_h|0xf0;//輸出當前列線值cord_l=P3&0xf0;//讀入行線值return(cord_h+cord_l);//鍵盤最后