1、 AMS系列存儲安裝手冊系統設置Resource Manager管理安裝Hitachi Resource Manager2(Storage Navigator Modular2)將Hitachi Resource Manager2 光盤放入CDROM驅動器，運行光盤上windows目錄中的setup.exe文件，按照提示安裝Resource Manager 軟件。配置/管理Hitachi source Manager使用IE，進入地址：http:/localhost:23015/StorageNavigatorModular/Login輸入User Id/Password進入，進行管理在下圖S

2、torage Navigator Modular2在添加AMS存儲的信息進入設備的初期信息修改向導設置E-mail提醒（如果不用，請設為Disable）：修改管理端口的IP地址：修改前端端口屬性（連接交換機要改為P2P，直聯使用Loop）：修改系統時間：各項確認：添加完畢后出現的管理窗口如下：設置Spare盤創建Raid組創建Lun打開Host Group Security參數添加HostGrop創建主機WWN映射映射Lun修改主機平臺添加WWN別名。主機識別硬盤，HDLM安裝及設置存儲參數設置主機識別硬盤及HDLM安裝安裝AIX_ODM1)進入AIX_ODM所在的目錄，分別按照下列順序安裝其

3、中的軟件：#cd V#smitty install_latest#cd VU#smitty install_latest#cd VU#smitty install_latest#cd VU#smitty install_latestInstall SoftwareType or select values in entry fields.Press Enter AFTER making all desired changes. Entry Fields* INPUT device / directory for software .* SOFTWARE to install _all_late

4、st + PREVIEW only? (install operation will NOT occur) no + COMMIT software updates? yes + SAVE replaced files? no + AUTOMATICALLY install requisite software? yes + EXTEND file systems if space needed? yes + OVERWRITE same or newer versions? no + VERIFY install and check file sizes? no + Include corr

5、esponding LANGUAGE filesets? yes + DETAILED output? no + Process multiple volumes? yes + ACCEPT new license agreements? no + Preview new LICENSE agreements? no +F1=Help F2=Refresh F3=Cancel F4=ListEsc+5=Reset Esc+6=Command Esc+7=Edit Esc+8=ImageEsc+9=Shell Esc+0=Exit Enter=Do安裝HDLM軟件從光盤上拷貝*.plk至/var

6、/tmp/hdlm_licensesmitty install_latestInstall SoftwareType or select a value for the entry field.Press Enter AFTER making all desired changes. Entry Fields* INPUT device / directory for software /dev/cd0 +F1=Help F2=Refresh F3=Cancel F4=ListEsc+5=Reset Esc+6=Command Esc+7=Edit Esc+8=ImageEsc+9=Shell

7、 Esc+0=Exit Enter=Do Install SoftwareType or select values in entry fields.Press Enter AFTER making all desired changes. Entry Fields* INPUT device / directory for software /dev/cd0* SOFTWARE to install _all_latest + PREVIEW only? (install operation will NOT occur) no + COMMIT software updates? yes

8、+ SAVE replaced files? no + AUTOMATICALLY install requisite software? yes + EXTEND file systems if space needed? yes + OVERWRITE same or newer versions? no + VERIFY install and check file sizes? no + Include corresponding LANGUAGE filesets? yes + DETAILED output? no + Process multiple volumes? yes +

9、 ACCEPT new license agreements? yes + Preview new LICENSE agreements? no +F1=Help F2=Refresh F3=Cancel F4=ListEsc+5=Reset Esc+6=Command Esc+7=Edit Esc+8=ImageEsc+9=Shell Esc+0=Exit Enter=Do打Sp1補丁執行# lslpp -la DLManager.mpio.rte命令，確保文件DLManager.mpio.rte被安裝。 Fileset Level State Description Path: /usr/

10、lib/objrepos DLManager.mpio.rte COMMITTED Dynamic Link Manager Path: /etc/objreposDLManager.mpio.rte COMMITTED Dynamic Link Manager刪除hdlm管理設備，執行# /usr/DynamicLinkManager/bin/dlmrmdev命令。安裝補丁：# installp -acXgd directory-storing-copied-installation-file all（請指向SP光盤中的文件解壓）驗證： # lslpp -la DLManager.mpio.

11、rte Fileset Level State Description Path: /usr/lib/objrepos DLManager.mpio.rte COMMITTED Dynamic Link Manager COMMITTED Dynamic Link Manager Path: /etc/objreposDLManager.mpio.rte COMMITTED Dynamic Link Manager識別設備刪除原來識別出的設備：rmdev -dl fcs0 -Rrmdev -dl fcs1 R重新識別出新設備：cfgmgr v修改設備參數# rmdev -l fscsi0 R#

12、 rmdev -l fscsi1 R# chdev -l fscsi0 -a fc_err_recov=fast_fail# chdev -l fscsi1 -a fc_err_recov=fast_fail#cfgmgr vAdding Custom Disk Methods1. From the SMIT window, display the Add Custom Disk Methods window.Choose the following sequence of menu items to display this window:Communications Application

13、s and Services, HACMP for AIX,Extended Configuration, Extended Resource Configuration, HACMPExtended Resource Configuration, Configure Custom Disk Methods,and finally choose Add Custom Disk Methods.2. In the Add Custom Disk Methods window, specify the items as shownbelow:The items to be set and sett

14、ing contents are shown below: When a Fibre Channel connection is used with HACMPChange the custom disk method settings as described below. Thedescription includes information about the items and contents of thesettings.Disk Type (PdDvLn field from CuDv) When a Hitachi AMS2000/AMS/WMS/SMS series is u

15、sed:disk/fcp/HitachiMethod to identify ghost disksSCSI3Method to determine if a reserve is held/usr/DynamicLinkManager/cluster/dlm_hacmp_gdisk_reserve_checkMethod to break a reserveTARGETBreak reserves in parallelfalseMethod to make the disk availableMKDEV3. When you finish specifying the settings,

16、click the OK button.4. From the SMIT window, display the Single Select List window.Choose the following sequence of menu items to display this window:Communications Applications and Services, HACMP for AIX,Extended Configuration, and finally choose Extended Verification andSynchronization.Setting th

17、e Reservation PolicyWhen you use HACMP, we usually recommend that you set thereserve_policy attribute to PR_exclusive. However, when a virtual I/Ofunction is applied in order to use HACMP in a client partition, use thefollowing procedure to check, in the virtual I/O server partition, the settingsfor

18、 the reserve_policy attribute of the hdisk. If reserve_policy is set toPR_exclusive, change its value to no_reserve.1. Check the setting for the reserve_policy attribute of the hdisk.# lsattr -El hdiskn -a reserve_policyreserve_policy PR_exclusive N/A TRUEPerform the following steps if reserve_policy is set to PR_exclusive:2. Quit all applications that specify and