1、在Dell R720 服務器上安裝2003 x64成功！開機按F2進入BIOS設置: · Click on System BIOS to enter into BIOS menu. · Click SATA settings and change the Embedded SATA to ATA Mode. The default is AHCI mode on Dell 12th Generation servers.· Save the changes and reboot the system.· Insert Windows

2、2003 DVD and boot from it.· Insert the PERC drivers floppy disk into the floppy drive.· 注意：當用戶更改完成ATA Mode ，保存后重啟。服務器會有提示變更了模式，是否保存。這時需要用戶按Y鍵確認更改。如果用戶沒有確認，則ATA Mode會自動還原成AHCI Mode。這樣在BIOS里的更改就無效了。 用：USBKeyPrepF6制作U盤工具，將MID_1463492_W2K3_x64_Signed_Driver_5.1.112里面的文件制作到U盤里。（USBKey

3、PrepF6工具的使用請查閱Dell論壇，或google）.制作完成將U盤插入Dell R720后置USB接口.重啟服務器（或開機）。· Press F6 to load Custom drivers from floppy disk.· Press “S” in the following screen· Select the Custom PERC Driver from the floppy.· Now that the appropriate driver is selected, Press Enter to continue loa

4、ding the driver.· Installation should recognize the hard disk after loading the Custom PERC drivers.· Select the recognized disk and installation continues successfully.· Login to the Operating system after successful installation.· Download the Chipset driver downloade

5、d from Dell support website for the Server(Ex: R720) and install the executable. This will recognize the Chipset related Unknown devices in Device Manager.· 當完成2003 x64位的安裝后，安裝第二張光盤內容。然后到Dell 官方下載芯片組驅動。并安裝芯片組驅動，安裝完成芯片組驅動后，在設備管理器里將會出現只有網卡驅動沒有安裝。· 關于網卡驅動：我的Dell R720是四口的Broadcom 5720的Dell 官方的網卡驅動無效，Broadcom